How to Configure Multiarea OSPF in Cisco

  Configure Multiarea OSPF in CIsco R1 Initial Contigure R1#conf t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int e0/0 R1(config-if)#no sh R1(config-if)#ip add R1(config-if)#ip address *Apr 4 10:30:32.875: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up *Apr 4 10:30:34.159: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed state to up R1(config-if)#ip address 192.168.1.1 255.255.255.0 R1(config-if)#int e0/1 R1(config-if)#no sh R1(config-if)#ip add R1(config-if)#ip address 10.1 *Apr 4 10:30:53.515: %LINK-3-UPDOWN: Interface Ethernet0/1, changed state to up R1(config-if)#ip address 10.10.10 *Apr 4 10:30:54.535: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/1, changed state to up…

Read More